Description

DESCRIPTION





A single washer system check valve is standard equipment on this vehicle, and is installed in the washer system plumbing. The check valve is integral to the washer nozzle plumbing Y fitting (2) located in the cowl plenum area beneath the cowl plenum cover/grille panel near the base of the windshield. The check valve consists of a molded plastic body with a raised arrowhead (4) molded into its center section that indicates the direction of the flow through the valve, and three barbed hose nipples (1 and 3) formed in a Y configuration on the outside circumference of the center section of the valve body. The check valve cannot be adjusted or repaired and, if ineffective or damaged, it must be replaced.