Water Pump - Removal

6.7L DIESEL





1. Disconnect battery negative cables.
2. Drain cooling system Service and Repair .
3. Disconnect ambient air temp sensor electrical connector and mass airflow sensor electrical connector (if equipped).
4. Remove turbocharger inlet tube and air filter housing. For 5.9L Diesel, Air Cleaner Housing - Removal, for 6.7L Diesel, Air Cleaner Housing - Removal .
5. Remove generator assembly Generator - Removal .
6. Remove the accessory drive belt Accessory Drive Belt - Removal .
7. Remove water pump mounting bolts (3).
8. Remove O-ring from water pump.
9. Clean water pump sealing surface on cylinder block.