Engine Oil Cooler - Removal

REMOVAL - OIL COOLER





1. Disconnect Negative battery cables Battery Cables - Removal
2. Drain Coolant. Service and Repair
3. Disconnect Ambient Air and MAF Sensors on Air Filter housing.
4. Loosen hose clamp at Turbocharger Inlet.
5. Move clamp on Engine Breather hose at Inlet elbow at turbocharger and remove hose.
6. Remove Air Filter housing cover and inlet hose and set aside. Air Cleaner Housing - Removal
7. Remove upper generator bolt, loosen lower generator bolt, and rotate generator away from cylinder head. Generator - Removal
8. Loosen the three clamps and hoses from the Coolant outlet tube.
9. Loosen and remove the bracket attachment nut from Coolant tube (10 mm).
10. Remove Coolant outlet tube.
11. Loosen turbocharger oil supply hose from oil cooler housing.
12. Remove oil filter. Removal
13. Loosen and remove the 14 oil cooler attachment capscrews (10 mm).
14. Remove oil cooler housing and oil cooler from engine block.