Removal

REMOVAL

FREE PIVOT/HINGE COVER






NOTE: Do not reuse the seat fasteners, always replace with new ones.

1. Remove the seat back Removal .
2. Disconnect the storage bin/cushion cover j-strap and position aside.
3. Remove and discard the pivot bolt (1).




4. Remove the hinge spacer (2).




5. Open the hinge cover flap (1) and remove the wire harness (5 - if equipped).
6. Remove the cover (3) from the hinge (4).


INERTIA HINGE






NOTE: Do not reuse the seat fasteners, always replace with new ones.

1. Remove the seat back Removal .
2. Remove the seat back inertia hinge cover Removal .
3. Remove and discard the inertia hinge bolts (1) and remove the hinge (3).