Operation CHARM: Car repair manuals for everyone.
Home >> Dodge and Ram >> 2008 >> RAM 3500 Truck 4WD L6-6.7L DSL Turbo >> Repair and Diagnosis >> Transmission and Drivetrain >> Transfer Case >> Seals and Gaskets >> Service and Repair >> NV273 Transfer Case >> Seal-Front Output Shaft >> Installation

Installation







INSTALLATION





1. Install the new front output shaft seal with Seal Installer MB991168A.
2. Install the front companion flange onto the front output shaft.
3. Install two bolts 180° apart into the front output shaft companion flange.
4. Place Yoke Holder 6719 (1) over the bolts (2) and against the companion flange.
5. Install a new front companion flange nut. Tighten the companion flange nut to 176-271 Nm (130-200 ft.lbs.).
6. Install front propeller shaft Removal and Replacement .
pro multis · About Operation CHARM