Wind Deflector - Installation

INSTALLATION

Including front hinges:





1. Position the spring arms down into the trough.
2. Place wind deflector arms in upward position engage the wind deflector blade into the U-frame.
3. Seat the retaining clips (2) fully.





4. Position the wind deflector hinges (1) into the U-frame at the notch (2) and secure down into the channel fully. Right side hinge shown, left side similar.
5. Verify wind deflector operation.
6. Install the sun roof assembly Sunroof Glass - Installation.

Without front hinges:





1. Position wind deflector assembly (1) into the roof opening (2) and slide forward to the mounting point in the U-frame.





2. Position the wind deflector hinges (1) into the U-frame at the notch (2) and secure down into the channel fully. Right side hinge shown, left side similar.

NOTE: Placing a small rolled up piece of paper or equivalent, between the hinge and the sunroof opening may aid installation of the wind deflector.

3. Position the front of the wind deflector over the front hinges and seat down onto the retaining clips fully.