Electronic Vehicle Information Center - Installation

ELECTRONIC VEHICLE INFORMATION CENTER

NOTE: If a new Electronic Vehicle Information Center (EVIC) has been installed, the compass will have to be calibrated and the variance set. Adjustments and Adjustments for the appropriate procedures.





1. Position the Electronic Vehicle Information Center (EVIC) (2) onto the overhead console housing (3).
2. Install the screws (1) that secure the EVIC (2) to the overhead console housing (3). Tighten the screws to 2 Nm (20 in. lbs.).
3. Install the overhead console onto the headliner, Overhead Console - Installation.
4. Reconnect the battery negative cable.