Rear A/C-Heat Control

BULB - REAR A/C-HEAT CONTROL





1. Disconnect and isolate the battery negative cable. On vehicles equipped with the optional Hybrid Electric Vehicle (HEV) system, a technician trained in proper HEV service safety procedures must also remove the high voltage service disconnect from the high voltage battery pack.
2. Remove the rear A/C-heater control from the center floor console. A/C and Heater Control - Removal.
3. Use a small thin-bladed screwdriver to rotate the bulb holder (2) counterclockwise about 30 degrees to unlock it from the keyed opening in rear A/C-heater control (1) circuit board.
4. Pull the bulb holder and bulb straight out of the circuit board.