Rear Door Glass - Installation

INSTALLATION






NOTE: When installing the quarter glass, position the glass in the glass run weather strip and seat fully then install the rear glass run channel. Rear Door Glass Channel - Installation

1. Position the glass into the door and install onto the regulator.
2. Install the nuts (4) and tighten to 9 Nm (80 in. lbs.).
3. Position the outer belt molding onto the door and seat the molding fully starting at the back of the door.
4. Position the inner belt molding onto the door and seat fully starting at the back of the door.
5. Install the watershield. Water Shield - Installation.