Operation CHARM: Car repair manuals for everyone.
Home >> Dodge and Ram >> 2009 >> Durango 4WD V8-5.7L Hybrid >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Variable Valve Timing Solenoid >> Service and Repair >> Oil Intake Control Valve - Installation
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Oil Intake Control Valve - Installation





INSTALLATION

WARNING: On vehicles equipped with the high voltage system, you must thoroughly read and follow all High Voltage Safety procedures. In addition, before performing any diagnostic or service procedure near a high voltage component, you must perform the High Voltage Power Down. Failure to follow these instructions may result in possible serious or fatal injury Service Precautions





1. Install the oil control valve (OCV) (1).
2. Securely tighten the OCV fastener.
3. Connect the OCV electrical connector (2).
4. Install the intake manifold Intake Manifold - Installation





5. Connect the 12 volt battery system ground isolation connector (1) located next to the electric vacuum pump (2).
6. Perform the HEV high voltage power up procedure Battery System - High Voltage Power Up

pro multis · About Operation CHARM