Cylinder Head Assembly

SURFACE VARIATION

Cylinder Head For Out-of-flatness 0.0508 mm (0.002 in.)

CYLINDER HEAD





Position the cylinder head(s) in place.
Using the sequence shown, tighten the cylinder head bolts 1 through 10 to 34 Nm (25 ft. lbs.)
Using the sequence shown, tighten the cylinder head bolts 11 through 15 to 20 Nm (15 ft. lbs.)
Using the sequence shown, tighten the cylinder head bolts 1 through 10 to 54 Nm (40 ft. lbs.)
Using the sequence shown, tighten the cylinder head bolts 11 through 15 to 20 Nm (15 ft. lbs.)
Using the sequence shown, rotate the cylinder head bolts 1 through 10 90°.
Using the sequence shown, tighten the cylinder head bolts 11 through 15 to 34 Nm (25 ft. lbs.)

INTAKE MANIFOLD





Intake Manifold Bolts 12 Nm (9 ft. lbs.)

CAMSHAFT PULLEY/GEAR TORQUE

Camshaft Sprocket Bolt 122 Nm (90 ft. lbs.)

EXHAUST MANIFOLD









Exhaust Manifold-to-Cylinder Head 25 Nm (18 ft. lbs.)