Second Row, Swivel

INSTALLATION

NOTE: Right seat shown in illustrations. Left seat similar.





1. Position the seat back cushion (6) onto the seat back frame (5). If equipped, make sure the heated seat wire harness lead is correctly routed to the bottom of the seat.
2. Install the seat back cover (2) over the top of the seat back frame and cushion.
3. Engage the retaining strip (3) that secures the seat back cover to the seat back cushion. Slide the strip on the cover into the channel in the cushion.
4. Engage the two hook and loop retainers (1 and 4) that secure the seat back cover to the seat back cushion.





5. Engage the three J-hook retainers (1) that secure the seat back cover (2) to the seat back.
6. Engage the two hook and loop retainers (3) at the bottom of the seat back cover.





7. Engage the J-hook retainer (1) that secures the bottom of the seat back cover (2) to the seat back.
8. Install the headrest sleeves Headrest Sleeve - Installation.
9. Install the seat back cover Seat Back Cover - Installation.
10. Install the headrest Headrest - Installation.
11. Install the arm rests Armrest - Installation.
12. Install the seat back Seat Back - Installation.
13. Install the seat into the vehicle.