Seat Shield - Installation

INSTALLATION





1. Position the lower side shields and engage the retaining tabs to the front of the seat frame.
2. Install the screws (1) that secure the lower side shields to the rear and to the side of the seat cushion frame. Tighten the screws securely.
3. If servicing the outboard lower side shield, install the cup holder and the two retaining screws (3). Tighten the screws securely.
4. Install the seat cushion upper sides shields and engage the retaining tabs to the lower side shields.
5. If servicing the outboard side shields, install the recliner handle (2) and engage the retaining tab on the handle.