Ignition Coil - Installation

3.3/3.8L





1. Install coil over studs on bracket.
2. Install 2 nuts to the ignition coil studs and tighten nuts.
3. Connect the electrical connector to the ignition coil.
4. Install the ignition cables to the ignition coil.
5. Reposition the power steering reservoir. Slide bracket over the mounting stud.
6. Install 2 bolts to the Power steering reservoir to intake manifold.
7. Tighten the lower nut to stud on ignition coil bracket.
8. Connect negative battery cable and tighten nut to 5 Nm (45 in. lbs.).