Third Row Power Folding Seat Module - Installation

INSTALLATION





1. Position the third row power folding seat module (1) onto the module bracket (3). Ensure the mounting knobs (2) and retaining tabs (4) are aligned with the appropriate slots in the bracket (3).
2. Push the module into the bracket until the mounting knobs (2) and retaining tabs (4) are fully seated.





3. Connect the module (4) electrical connector (3).
4. Position the third row power folding seat module and bracket (4) onto the seat pan (2) and secure with the pushpin retainers (1).
5. Install the seat cushion and cover assembly, Seat Cushion Cover - Installation.
6. Install the third row power folding seat, Seat - Installation.
7. Perform the third row power folding seat recliner calibration, Programming and Relearning. Verify proper seat operation.