Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Front

INSTALLATION

Automatic Temperature Control (ATC)

1. Position the A/C-heater control (2) into the instrument panel center bezel (3).
2. Install the screws (1) that secure the A/C-heater control to the center bezel. Tighten the screws to 2 Nm (17 in. lbs.).

CAUTION: Each wire connector is individually keyed to its respective receptacle on the back of the A/C-heater control. Be sure to note the color and location of each connector when reinstalled to the back of the A/C-heater control. Do not force any connector onto the A/C-heater control. Failure to follow this caution can damage the A/C-heater control system.

3. Install the instrument panel center bezel (1).
4. Reconnect the negative battery cable.
5. Calibrate the A/C-heater control HVAC System Test.

Manual Temperature Control (MTC)

1. Position the A/C-heater control (2) into the instrument panel center bezel (3).
2. Install the screws (1) that secure the A/C-heater control to the center bezel. Tighten the screws to 2 Nm (17 in. lbs.).

CAUTION: Each wire connector is individually keyed to its respective receptacle on the back of the A/C-heater control. Be sure to note the color and location of each connector when reinstalled to the back of the A/C-heater control. Do not force any connector onto the A/C-heater control. Failure to follow this caution can damage the A/C-heater control system.

3. Install the instrument panel center bezel (1).
4. Reconnect the negative battery cable.
5. Calibrate the A/C-heater control HVAC System Test.