Satellite Antenna Cable - Installation

INSTALLATION

SATELLITE AUDIO ONLY





NOTE: The antenna cables are integrated into the body harnesses. New antenna cables come as a overlay to the body harness.

1. Route the new harness over the old harness.
2. Connect each end of the cable (1).
3. Place carpet into position.
4. Install the B-pillar lower trim panel B-Pillar Trim Panel-Installation.
5. Install the B-pillar upper trim panel Remove the C-pillar upper trim panel.
6. Install the headliner Headliner - Installation.
7. Connect the battery negative cable.

SATELLITE AUDIO/VIDEO

AUDIO CABLE TO MODULE






NOTE: The antenna cables are integrated into the body harnesses. New antenna cables come as a overlay to the body harness.

1. Route the new harness over the old harness.
2. Install the antenna base to the roof of the vehicle.
3. Install the antenna bracket.
4. Install the fastener to the mounting bracket.
5. Install the antenna mast by screwing the mast to the antenna body.
6. Connect the antenna cable to the module.
7. Install the headliner Headliner - Installation.
8. Connect the negative battery cable.

VIDEO CABLE FROM ANTENNA TO MODULE

NOTE: The antenna cables are integrated into the body harnesses. New antenna cables come as a overlay to the body harness.

1. Route the new harness over the old harness.
2. Install the antenna base to the roof of the vehicle.
3. Install the antenna bracket.
4. Install the fastener to the mounting bracket.
5. Install the antenna mast by screwing the mast to the antenna body.
6. Connect the antenna cable from the module.
7. Install the headliner Headliner - Installation.
8. Connect the negative battery cable.

SIGNAL CABLE FROM RADIO TO COWL

NOTE: The antenna cables are integrated into the body harnesses. New antenna cables come as a overlay to the body harness.

1. Route the new harness over the old harness.
2. Install the radio Radio - Installation.
3. Install the glove box Instrument Panel Glove Box - Installation.
4. Install the passenger side cowl trim panel Cowl Trim Panel - Installation.
5. Install the passenger side scuff plates Scuff Plate - Installation.
6. Connect the negative battery cable.

SIGNAL CABLE FROM COWL TO INNER REAR ROOF

NOTE: The antenna cables are integrated into the body harnesses. New antenna cables come as a overlay to the body harness.

1. Route the new harness over the old harness.
2. Connect the antenna cable from the video module.
3. Install the passenger side cowl trim panel Cowl Trim Panel - Installation.
4. Install the passenger side scuff plates Scuff Plate - Installation.
5. Install the headliner Headliner - Installation.
6. Connect the negative battery cable.