Right Rear Door Ajar Circuit Shorted To Ground

RIGHT REAR DOOR AJAR CIRCUIT SHORTED TO GROUND





For a complete wiring diagram, refer to the Wiring Information Electrical Diagrams.






1. RIGHT REAR DOOR AJAR SWITCH SHORT TO GROUND




1. With the scan tool in Inputs/Outputs, read the R R DOOR AJAR SW state.
2. While monitoring the scan tool, disconnect the Right Rear Door Latch connector.

Did the Switch State change from CLOSED to OPEN?

Yes

- Replace the Right Rear Door Ajar Switch.
- Perform the BODY VERIFICATION TEST. Body Verification Test.

No

- Go To 2

2. (G76) RIGHT REAR DOOR AJAR SWITCH SENSE CIRCUIT SHORT TO GROUND




1. Disconnect the Instrument Cluster C3 harness connector.
2. Using a 12-volt test light connected to 12-volts, probe the (G76) Right Rear Door Ajar Switch Sense circuit and test for a short to ground.

Does the test light illuminate brightly?

Yes

- Repair the (G76) Right Rear Door Ajar Switch Sense circuit for a short to ground.
- Perform the BODY VERIFICATION TEST. Body Verification Test.

No

- Replace the Instrument Cluster.
- Perform the BODY VERIFICATION TEST. Body Verification Test.