Removal

REMOVAL

1. Disconnect the negative battery cable.
2. Remove the kneeblocker Steering Column Opening Cover - Removal.
3. Remove the brake lamp switch and discard it.Do not reuse the stop lamp switch.Stop Lamp Switch - Removal.









4. Disconnect the adjustable pedal cables from the brake and accelerator pedals Also clutch pedal if equipped with a manual transmission.
5. Disconnect the electrical connector.
6. Unclip the cable fasteners to the support.
7. Remove the one mounting bolt (2) for the adjustable pedal motor (1).
8. Remove the adjustable pedal motor (1) with the cables.

NOTE: Adjustable pedal cables are not serviceable. If they need service the adjustable pedal motor with the cables must be installed.