Upper
INSTALLATION
REGULAR CAB
1. Position the upper B-pillar trim panel (5) to the B-pillar (4).
2. Engage the retaining tabs that secure the upper B-pillar trim panel to the B-pillar.
3. Install the bolt (2) that secures the seat belt (3) to the top of the B-pillar. Tighten the bolt to 40 Nm (30 ft. lbs.).
4. Install the cap (1) onto the seat belt.
QUAD CAB
1. Position the upper B-pillar trim panel (5) to the B-pillar (4).
2. Engage the retaining tabs that secure the upper B-pillar trim panel to the B-pillar.
3. Install the bolt (2) that secures the seat belt (3) to the top of the B-pillar. Tighten the bolt to 40 Nm (30 ft. lbs.).
4. Install the cap (1) onto the seat belt.
5. Install the grab handle (1) onto the B-pillar and install the two bolts (3). Tighten the bolts to 6 Nm (55 in. lbs.).
6. Close the two fastener covers (2) located on the grab handle.