Load Floor/Kneel Position Recliner Cable - Installation

INSTALLATION





1. Install the kneel handle and cable assembly (1) and install the screws (2).





2. Secure the cable (1) to the bezel (2) and install the bezel.





3. Position the kneel handle bezel (1) back onto the seat structure and install the front screw (2).





4. From under the seat cushion, install the inner handle bezel screw.





5. Install the recliner cover (1).
6. Position the seat back cushion and cover (1) aside and install the recliner cover screw (2).
7. Place the seat back in the full down position.





8. Carefully install the cable housing (1) into the support flange.
9. Connect the cable end (2) to the lever and rotate back into position.





10. Install the side recliner shield screw.





11. Install the rear recliner shield screws.





12. Secure the seat back cover lower J-straps.





13. Install the rear screw of the kneel handle bezel.
14. Position the rear load floor cover back.
15. Return the rear seat back into the full up position.