Heater Pad - Removal

REMOVAL






NOTE: The factory installed heating elements (3) can be removed from the seat or seat back cushions by carefully peeling the element off along the adhesive lines.

1. Disconnect and isolate the negative battery cable.
2. Remove the appropriate seat cushion, Seat Cushion Cover - Removal or seat back trim cover, Seat Back Cover - Removal.
3. Disconnect the inoperative heated seat cushion or seat back element electrical connectors (2).
4. Remove the heater element from the foam pad by peeling the element away from the cushion, being careful not to remove excessive foam in the process.