Pinion Seal - Installation

INSTALLATION





1. Install new pinion seal with Installer 10069 (1).
2. Apply a light coat of teflon thread sealant, to pinion flange splines.





3. Position flange on pinion shaft with reference marks aligned.
4. Install pinion flange (1) new pinion nut.
5. Hold flange with Holder C-3281 (2) and tighten pinion nut to 500 Nm (369 ft. lbs.).





6. Bend pinion flange (1) nut (2) collar into pinion keyway with a hammer and punch.
7. Install propeller shaft with reference marks aligned.