B1A0D

B1A0D-RKE FOB 6 PERFORMANCE

For a complete wiring diagram, refer to the Wiring Information Electrical Diagrams.

- When Monitored:
Continuously.

- Set Condition:
Scrambled messages to the Wireless Control Module (WCM) from the Remote Keyless Entry (RKE) transmitter.





NOTE: The most probable cause that sets this code is the Remote Keyless Entry (RKE) transmitter being pressed over 150 times when it is out of range of the Wireless Control Module and it loses synchronization with the rolling code of the WCM. To correct, insert the key in the ignition and turn to the on position to synchronize the rolling code.
TEST FOR INTERMITTENT CONDITION
1. Put the key in the ignition and turn the ignition on.
2. Using the scan tool, record and erase DTCs
3. Operate the RKE transmitter in all positions several times.
4. Using the scan tool, read DTCs.

Does the scan tool display this code as active?

Yes

- Replace the Remote Keyless Entry transmitter and program.
- Perform the WCM VERIFICATION TEST. Wireless Control Module (WCM) Verification Test

No

- The conditions that caused this code to set are not present at this time. Inform the owner of the most probable cause for this code to set and therefore cause the RKE system to be inoperative.
- Perform the WCM VERIFICATION TEST. Wireless Control Module (WCM) Verification Test