B1BC7

B1BC7-DEPLOYMENT DATA RECORD FULL

- When Monitored:
With the ignition on. The Occupant Restraint Controller (ORC) on board diagnostics continuously performs internal circuit tests.

- Set Condition:
This DTC will set if the ORC identifies an out of range internal circuit.





VERIFY ACTIVE DTC
1. Turn the ignition on.
2. With the scan tool, read ORC DTCs.

Does the scan tool display active B1BC7-DEPLOYMENT DATA RECORD FULL DTC?

Yes

- WARNING: Turn the ignition off, disconnect the 12-volt battery and wait two minutes before proceeding. Failure to follow these instructions may result in possible serious or fatal injury.

- WARNING: If the Occupant Restraint Controller (ORC) is dropped at any time, it must be replaced. Failure to follow these instructions may result in possible serious or fatal injury.

- Replace the Occupant Restraint Controller.
- Perform ORC VERIFICATION TEST.Occupant Restraint Controller (ORC) Verification Test.

No

- Perform ORC VERIFICATION TEST. Occupant Restraint Controller (ORC) Verification Test.