Differential Case Assembly

INSTALLATION





1. Install differential into carrier.
2. Install differential bearing cups and adjusters (1) into carrier.





3. Install differential bearing caps (1).






NOTE: Before tightening bearing caps, preform differential bearing preload and backlash adjustments.

4. Install new bearing cap (2) bolts and tighten to 190 Nm (140 ft. lbs.).





5. Install differential adjuster cotter pins (1) in bearing caps (2).





6. Rotate carrier in bench Fixture 9385 and attach carrier Fixture 10048 (1) to transmission jack with fixture clamps (2).
7. Remove carrier with Fixture 10048 and transmission jack from bench Fixture 9385.