Operation CHARM: Car repair manuals for everyone.
Home >> Dodge and Ram >> 2009 >> Sprinter 3500 V6-3.0L DSL Turbo >> Repair and Diagnosis >> Brakes and Traction Control >> Antilock Brakes / Traction Control Systems >> Electronic Brake Control Module >> Service and Repair >> Anti-Lock Brake System Module - Installation
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Anti-Lock Brake System Module - Installation






INSTALLATION






CAUTION: When removing ABM from HCU, be sure to completely separate the two components (approximately 38 mm (1.5 in.) before removing ABM. Otherwise, damage to the pressure sensor or Pump Motor connection may result requiring HCU replacement. Do not to touch the sensor terminals on the HCU side or the contact pads on the ABM side as this may result in contamination and issues in the future.

NOTE: If the ABM module is being replaced with a new ABM module it must be reprogrammed with the use of a scan tool.

1. Install ABM (1) to the HCU.
2. Install mounting screws (2). Tighten to 2 Nm (16 in. lbs.).
3. Install the wiring harness connector to the ABM and push down on the release to secure the connector.
4. Install negative battery cable to the post by the accelerator pedal.
5. Perform function test using a scan tool.

pro multis · About Operation CHARM