Engine Torque Specifications

TORQUE

ENGINE BLOCK






CYLINDER HEAD






FRONT OF THE ENGINE






TURBOCHARGER AND EXHAUST






ENGINE MOUNTING






CYLINDER HEAD SEQUENCE






HEAD BOLT REUSE/REPLACE

CAUTION: Inspect and measure all cylinder head bolt lengths. If out of specification, replace as necessary. Do Not lubricate new cylinder head bolts. They already are coated with an anti scuff treatment.

MAIN BEARING CAP SEQUENCE






FLEXPLATE

Flex Plate 44 Nm (32.5 ft. lbs.)

Tighten the flex plate fasteners in a cross sequence.

WATER PUMP

Water Pump - Bolts 14 Nm (10 ft. lbs.)

INTAKE MANIFOLD SEQUENCE

Tighten bolts starting in the middle and tightening in a cross pattern outward until reaching the upper thermostat bolts on the right front manifold.