Operation CHARM: Car repair manuals for everyone.
Home >> Dodge and Ram >> 2009 >> Sprinter 3500 V6-3.0L DSL Turbo >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Fuel Pressure Sensor >> Service and Repair >> Fuel Pressure Sensor - Installation
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Fuel Pressure Sensor - Installation






INSTALLATION

WARNING: No sparks, open flames or smoking. Risk of poisoning from inhaling and swallowing fuel. Risk of injury to eyes and skin from contact with fuel. Pour fuels only into suitable and appropriately marked containers. Wear protective clothing.

NOTE: The installation of the pressure sensor must be performed out of vehicle so that the sensor can be tightened properly.

1. Install the fuel rail pressure sensor and new seal. Tighten to 22 Nm (194 lbs. in.).
2. Install the fuel rail.
3. Connect rail sensor electrical connector.
4. Connect negative battery cable.
5. Start engine, allow to warm, turn engine off and inspect for leaks.
6. Install engine cover.

pro multis · About Operation CHARM