Operation CHARM: Car repair manuals for everyone.
Home >> Dodge and Ram >> 2009 >> Sprinter 3500 V6-3.0L DSL Turbo >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Fuel Pressure Sensor >> Service and Repair >> Fuel Pressure Sensor - Removal
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Fuel Pressure Sensor - Removal






REMOVAL

WARNING: No sparks, open flames or smoking. Risk of poisoning from inhaling and swallowing fuel. Risk of injury to eyes and skin from contact with fuel. Pour fuels only into suitable and appropriately marked containers. Wear protective clothing.

NOTE: To avoid leakage problems, the rail pressure sensor should not be removed unless it is to be replaced.

1. Disconnect negative battery cable.
2. Remove engine cover.
3. Unplug electrical connector at fuel rail pressure sensor.
4. Remove the right fuel rail.
5. Position the fuel rail in a soft jawed vise.
6. Remove rail pressure sensor.
pro multis · About Operation CHARM