Operation CHARM: Car repair manuals for everyone.
Home >> Dodge and Ram >> 2009 >> Sprinter 3500 V6-3.0L DSL Turbo >> Repair and Diagnosis >> Powertrain Management >> Relays and Modules - Powertrain Management >> Relays and Modules - Computers and Control Systems >> Engine Control Module >> Service and Repair >> Engine Control Module - Removal
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Engine Control Module - Removal






REMOVAL

NOTE: If a replacement (new) Powertrain Control Module (PCM) is installed, a scan tool must be used to program (flash) the new PCM with vehicle specific information.

1. Disconnect the negative battery cable.





2. Disconnect the PCM harness connectors (2).
3. Grasp PCM (1) and pull up firmly to release PCM (1) from the retaining bracket.

Vehicles Equipped With Dual Batteries

1. Disconnect both negative battery cable.
2. Disconnect the positive cable from under hood battery.
3. Remove the under hood battery.





4. Remove fasteners and position aside the washer reservoir.





5. Remove the upper battery tray bolt (1).





6. Remove the front two bolts (1) securing the battery tray.





7. Remove lower bolt (1) and battery tray (2).





8. Disconnect the Powertrain Control Module PCM harness connectors (2).
9. Grasp PCM (1) and pull up firmly to release PCM (1) from the retaining bracket.

pro multis · About Operation CHARM