Operation CHARM: Car repair manuals for everyone.
Home >> Dodge and Ram >> 2009 >> Sprinter 3500 V6-3.0L DSL Turbo >> Repair and Diagnosis >> Relays and Modules >> Relays and Modules - HVAC >> Control Module HVAC >> Service and Repair >> Rear Blower Motor Power Module - Installation
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Rear Blower Motor Power Module - Installation






INSTALLATION





1. Position the rear blower motor power module (3) to the rear evaporator housing (1) and connect the wire harness connector (2) to the module.
2. Install the rear blower motor power module into the rear evaporator housing and rotate the module a 1/4 turn clockwise until it is fully seated in the housing. Make sure the power module is fully engaged to the housing.





3. Install the rear evaporator trim panel (10) and retaining screws (6). Tighten the screws to 2 Nm (17 in. lbs.).
4. Install the air intake grille (5) onto the rear evaporator trim panel. Make sure the retaining tabs are fully engaged to the trim panel.
5. Install the front, center and rear roof duct trim panels (2, 9 and 8) and retaining screws (4 and 7). Tighten the screws to 2 Nm (17 in. lbs.).
6. Install the dome lamps (3).
7. Install the air outlets (1) Air Outlet - Installation.
8. Reconnect the negative battery cable.

pro multis · About Operation CHARM