Trailer Tow Relay - Installation

INSTALLATION






TRAILER TOW STOP/TURN RELAYS

1. Align the terminals of the left or right trailer tow stop/turn relay with the terminal receptacles of the trailer tow wire harness connector.
2. Firmly and evenly push the relay into the connector until it is fully seated.
3. Insert the relay and connector into the isolator envelope (3) secured to the wire harness (6) along the left or right body side aperture (2) just below the outer tail lamp.
4. Reinstall the rear fascia onto the vehicle. Rear Bumper Fascia - Installation.
5. Reconnect the battery negative cable.

TRAILER TOW STOP LAMP RELAYS

1. Align the terminals of the left or right trailer tow stop lamp relay with the terminal receptacles of the trailer tow wire harness connector.
2. Firmly and evenly push the relay into the connector until it is fully seated.
3. Insert the relay and connector into the isolator envelope (4) secured to the trailer tow wire harness (6) on the underside of the rear bumper reinforcement (1) on the left or right side of the 4-way trailer tow connector (5).
4. Reinstall the rear fascia onto the vehicle. Rear Bumper Fascia - Installation.
5. Reconnect the battery negative cable.