Engine Cooling Radiator - Installation

RADIATOR










1. Position radiator cooling fans on radiator.
2. Position combination A/C condenser/cooler on radiator.
3. Slide radiator into position and seat the radiator assembly lower rubber isolators in the mount holes.
4. Install A/C lines (1) to condenser.
5. Install support bracket (2) to radiator. Tighten mounting screws to 5 Nm (45 in. lbs.).

6. Connect cooling fan electrical connector (1).
7. Install lower radiator hose at radiator.
8. Install upper radiator mount.
9. Install front bottom splash shield









10. Install under engine splash shield.
11. Fill cooling system Service and Repair.
12. Charge A/C systemRefrigerant System Charge.
13. Install air filter housing Air Cleaner Body - Installation.
14. Install engine cover.
15. Install transmission oil cooler tube support bracket and attaching screw to left side of radiator. Tighten mounting screw to 5 Nm (45 in. lbs.).
16. Connect hoses to radiator.
17. Install radiator fan.
18. Connect radiator fan electrical connector.
19. Connect negative cable.