Pick Up Models

PICK UP MODELS




EGR VALVE GASKETS
1. Install a new EGR crossover tube gasket (1).
2. Install a new gasket (4) to bottom of EGR valve (2).




EGR VALVE - 6.7L
3. Position EGR valve assembly (2) and install the four EGR valve mounting bolts (1) finger tight.




EGR TUBE
4. Install clamps (3) at end of EGR crossover tube (2).
5. Install bolt (5) at center bottom of EGR crossover tube finger tight.
6. Tighten clamp (3) first to 10 Nm. (89 in. lbs.), then tighten clamp (1) to 10 Nm. (89 in. lbs.).
7. Tighten bolt (5) to 10 Nm (89 in. lbs.).




EGR VALVE - 6.7L
8. Tighten the four EGR valve mounting bolts (1) in a cross-cross fashion to 24 Nm (18 ft. lbs.).




EGR TEMPERATURE SENSOR
9. Connect the EGR valve harness connector (5).




EGR TUBE COVER
10. Install EGR crossover tube cover (2). Tighten bolts (1) to 10 Nm (89 in. lbs.).
11. Connect both negative battery cables.