Audio And Video - Operation

OPERATION

AUDIO SYSTEM

The audio system components are designed to provide audio entertainment and information through the reception, tuning and amplification of locally broadcast radio signals in both the Amplitude Modulating (AM) and Frequency Modulating (FM) commercial frequency ranges.

The audio system components operate on battery current received through a fuse in the Integrated Power Module (IPM) on a fused ignition switch output (RUN-ACC) circuit so that the system will only operate when the ignition switch is in the RUN or ACCESSORY positions.

NAVIGATION

The available navigation radio system receives GPS signals from up to eight satellites to display the position and direction of the vehicle. Map information is supplied through the harddrive. An electronic gyro-sensor and the vehicle's speed sensor enable the system to display the present vehicle position even in locations where GPS signals may be blocked, however system performance will be degraded.

When a destination is selected, the navigation system uses information from the map to quickly calculate a route. As the vehicle is driven along the chosen route, the operator is guided with pictorial displays and voice prompts. The navigation system will also reroute the user if a turn is missed. For complete operating instructions, refer to the manual included with the vehicle.

SATELLITE RADIO

The available satellite radio system is a subscription based service. Information sent by satellite is transmitted to the roof mounted antenna, then to the satellite receiver integrated in the radio. The operator then has the choice of multiple music/information channels.