Single Pane Sunroof Glass Seal - Installation

Installation






NOTE: It will be necessary to cut the new seal to length, as it is a multi-fit seal. Careful not to cut short. The metal inner of the seal will not allow stretching.

1. Align at seam point determined in removal,Single Pane Sunroof Glass Seal - Removal.

2. Insert seal (2) bottom larger end (3) first and shift upward to set upper pointed edge (1).
3. Repeat as necessary working around the sunroof glass.
4. Once at starting point mark the seal where ends will meet.
5. Using a pair of diagonal cutters or equivalent, cut through the seal.
6. Finish seating of the seal.
7. Install sunroof glass,Single Pane Sunroof Glass Seal - Installation