Brake Master Cylinder - Removal

REMOVAL





1. Disconnect the connector (3) from the body and lift the hood weather strip (2) back enough for access to remove the cowl side extension (5).
2. Remove the fastener (1) that secures the cowl side extension (5) to the center cowl extension.
3. Release the tab (4) that secures the cowl side extension (5) and remove the extension.





4. Siphon the master cylinder (1).
5. Disconnect the wire connector (2) from the fluid level sensor (3).





6. Disconnect the brake lines (4) at the master cylinder (1).
7. Remove the two master cylinder retaining nuts (3) and remove the master cylinder (1) from the booster.