Rear

REMOVAL

Special Tools:






NOTE: Take the proper precautions to protect the face of the rear A/C-heater control and bezel from cosmetic damage while performing this procedure.

NOTE: Automatic Temperature Control (ATC) shown. Manual Temperature Control (MTC) similar.





1. Disconnect and isolate the negative battery cable.
2. Using Trim Stick or equivalent, gently release the four retaining clips (2) that secure the rear control bezel (1) to the headliner.
3. Disconnect the wire harness connector from the rear A/C-heater control (4) and place the rear control and bezel on a workbench.
4. Remove the two screws (3 and 5) that secure the rear A/C-heater control to the bezel and remove the rear control.