Fog Lamp - Installation

LAMP





1. Reach through the outboard opening in the front of the front wheel house splash shield to access the back of the front fog lamp.
2. Position the front fog lamp mounting bracket (3) to the fog lamp bezel on the back of the lower front fascia (4).
3. Install and tighten the three screws (1) that secure the mounting bracket to the bezel. Tighten the screws securely.
4. Reconnect the headlamp and dash wire harness connector to the front fog lamp bulb (2) connector receptacle.
5. Reconnect the battery negative cable.
6. Confirm proper fog lamp alignment. Headlamp Alignment.