Air Cleaner Body - Removal

REMOVAL





1. Disconnect and isolate the negative battery cable.
2. Remove the engine cover (1).





3. Disconnect the electrical connector (2) from the Inlet Air Temperature (IAT) sensor.
4. Loosen the clamp (1) at the throttle body.
5. Loosen the clamp (4) at the air cleaner body.
6. Remove the resonator (3).





7. Disconnect the fresh air makeup hose (4) from the air cleaner body.
8. Disengage the hose retainer (5) from the air cleaner body.
9. Remove the push pin (3).
10. Reposition the hood seal (2) and pull the air cleaner body (1) straight up off of the locating pins.