Rear

REAR





1. Using a trim stick or another suitable wide flat-bladed tool, gently pry the rear washer nozzle (3) to release the latch features that secure it in the mounting hole of the liftgate spoiler (2).
2. Pull the rear washer nozzle out from the spoiler far enough to access the washer supply hose (1).
3. Disconnect the hose from the barbed nipple on the back of the nozzle.
4. Cut 4 to 6 millimeters (0.15 to 0.23 inch) from the end of the hose to ensure a good fit to the barbed nipple of the rear washer nozzle when it is replaced or reinstalled.