Rear Heater Core - Removal

REMOVAL

WARNING: Refer to the applicable warnings and cautions for this system before performing the following operation Warning and Caution . Failure to follow these instructions may result in serious or fatal injury.





1. Remove the rear heater-A/C housing (3) and place it on a workbench HVAC Housing - Removal.
2. Carefully remove the foam seal (4) from the bottom of the rear heater-A/C housing. Replace the seal if it is deformed or damaged.
3. Remove the screw (2) that secures the flange (1) to the rear heater-A/C housing.
4. Disengage the retaining tabs that secure each end of the flange to the rear heater-A/C housing and remove the flange.





5. Carefully pull the rear heater core and tube assembly (1) out of the side of the rear heater-A/C housing. If the foam seals on the heater core are deformed or damaged, they must be replaced.