Operation CHARM: Car repair manuals for everyone.
Home >> Dodge and Ram >> 2011 >> Durango 4WD V6-3.6L >> Repair and Diagnosis >> Starting and Charging >> Starting System >> Ignition Switch >> Service and Repair >> Wireless Ignition Node Receiver - Removal
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Wireless Ignition Node Receiver - Removal






REMOVAL





1. Disconnect and isolate the negative battery cable.

NOTE: Passenger side shown, drivers side similar.

2. Remove the drivers scuff plate Scuff Plate - Removal.
3. Remove the drivers cowl trim panel Cowl Trim Panel - Removal.
4. Remove the drivers side silencer pad.
5. Remove the steering column opening cover Steering Column Opening Cover - Removal.





6. Remove the right side knee blocker support bracket.
7. Remove the instrument cluster Instrument Cluster - Removal.
8. Through instrument cluster opening, remove the upper Wireless Ignition Node (WIN) bracket retainer.





9. From the steering column opening remove the two lower WIN bracket retainers one on the bottom and one on the side (1).
10. Pull the WIN (2) and bracket down through the steering column opening.
11. Disconnect the antenna and electrical connector.

pro multis · About Operation CHARM