Outside Rearview Mirror Glass - Installation

INSTALLATION

1. Connect the mirror wire harness to the heated glass electrical connector, if equipped.

NOTE: Pressure must be applied equally over the center portion of the mirror glass to fully engage the mirror glass retaining clips to the mirror motor.

2. Using one hand, carefully push the mirror glass holder onto the mirror motor, while at the same time supporting the mirror housing from the backside with the other hand. Firmly push on the mirror glass holder until all mirror glass retaining clips are fully engaged.
3. Verify retention of the mirror glass holder by gently pulling outward on the glass.
4. Reconnect the negative battery cable.