Front

REMOVAL





1. Before proceeding with the following repair procedure, review all warnings and cautions. Service Precautions
2. Remove the front seat. Front Seat - Removal
3. Remove the bolts (2) and the clamps (1) and remove the seat cushion.
4. Disconnect the electrical connectors, if equipped.





5. Separate the rear J-straps (1) and seat cushion cover and foam.





6. Lift the front of the seat cushion (2) up and slide out from under the seat back cushion (1).





7. Release the j-straps (1) and separate the seat cushion assembly from the seat pan.





8. Unwrap the seat cushion cover from the seat cushion foam and release the hook and loop fasteners.
9. While pulling down on the side of the seat cushion foam (3), slide out the retaining clips to separate the cover (1) from the foam.