Camshaft Core Hole Plug - Removal

CAMSHAFT CORE HOLE PLUG





1. Perform the fuel system pressure release procedure Service and Repair.
2. Remove the transmission.
3. Using the sequence shown, remove the flexplate retaining bolts.
4. Remove the flexplate.






CAUTION: Do not damage the rear surface of the camshaft or the core plug sealing surface, when removing the core plug.

5. Using a suitable sharp punch, place a small hole into the camshaft core hole plug (1).
6. Insert a short sheet metal screw into the small hole in the camshaft core hole plug.
7. Using a suitable slide hammer puller, remove the rear camshaft core hole plug.