Rear

REMOVAL

CAUTION: Propeller shaft removal is a two-man operation. Never allow propeller shaft to hang from the center bearing, or while only connected to the transmission or rear axle flanges. A helper is required. If a propeller shaft is hung unsupported, damage may occur to the shaft, coupler, and/or center bearing from over-angulation. This may result in driveline vibrations and/or component failure.





1. If equipped, remove skid plates. Skid Plate - Removal
2. Remove the exhaust (1) Removal.





3. With vehicle in neutral, position vehicle on hoist.

CAUTION: Failure to follow these instructions may result in a driveline vibration.

4. Mark propeller shaft (3) to the pinion flange (2) and transmission/transfer case flanges for installation reference.
5. Remove propeller shaft from axle pinion flange.





6. Remove the heat shield (3) from the center bearing.
7. Remove the center support bearing (5).
8. With the aid of a helper, remove propeller shaft assembly.