Heated Seat Module - Removal
REMOVAL
CAUTION: Use care when removing the Heated Seat Module (HSM) from the seat to prevent damage to the plastic HSM housing and retaining tab. Failure to follow these instructions may result in damage to the HSM and retaining tab.
1. Position the driver seat to the full rearward position.
2. Disconnect and isolate the negative battery cable.
3. Using an appropriate door trim tool or needle nose pliers, disengage the retaining tab (2) that secures the Heated Seat Module (HSM) (3) to the seat pan (1).
4. Disconnect the wire harness connector (4) from the HSM and remove the HSM from the vehicle.