Third Row

REMOVAL

1. Refer to Power Folding Third Row Seats - Description for seat exploded views and call outs.
2. Remove the seat from the vehicle and place it on a workbench Seat - Removal.
3. Disconnect the electrical connector from the seat back recliner motor.
4. Remove the seat back Seat Back - Removal.
5. Unzip both the outboard and inboard side of the seat cushion cover.
6. Disconnect the electrical connector from the seat back recliner switch located inside of the seat cushion cover, on the outboard bolster.

CAUTION: Do not remove the seat cushion and cover assembly from the seat cushion frame before disconnecting the seat back recliner switch electrical connector. Failure to follow this instruction may result in damage to the recliner switch and wire harness connector.

7. Remove the seat cushion and cover from the seat cushion frame as an assembly.
8. If required, remove the the seat back recliner switch from the seat cushion cover Power Seat Switch - Removal.